Plates for 4.5 mm & 6.5 mm Screws
| T - Plate 4.5 mm |
|
Shaft with round profile, for humeral and tibial head.
Fixation with 4.5 & 6.5 mm Screws. |
| Profile |
| Thickness- 2.0 mm |
| Width - 17.0 mm |
| Length : 3 Hole to 14 Hole |
| Cat. No. : MJ 044 |
| Condylar Plate 95° for Adults |
|
With DCP dynmic compression holes and slot for tension device. All condylar plates have an angle of 95° between blade and shaft. The two holes next to the blade are suitable for .5 mm cancellus bone screws, all other holes are self - compressing holes.
Fixation with 4.5 mm & 6.5 mm Screws.
For fractures in the distal and proximal feoral region as wall as for interrochanteric valgue osteotomy. |
| Profile |
| Thickness - 5.8 mm |
| Width - 16.0 mm |
| Hole Spacing - 16.0 mm |
Length : 5 Hole to 18 Hole
U-Profile Blade - 6.5 mm * 16.0 mm |
| Blade Length : 50 mm to 80 mm |
| Cat. No. : MJ 045 |
| L - Buttress Plate 4.5 mm |
|
With double bend, as buttress for tibial and humeral head fractures. Left angled for right leg & right angled for left leg. |
| Profile |
| Thickness- 2.0 mm |
| Width - 16.0 mm |
| Length : 3 Hole to 14 Hole |
| Cat. No. : MJ 046 |
|
|
