Export
Exports inquires are generated from various parts of the world for supply of different types and wide range of orthopaedic implants and other orthopaedic products made out of exclusively products range.

For futher details please email us at : info@mjsurgical.com
Plates for 4.5 mm & 6.5 mm Screws

Straight Recontruction Plate 4.5 mm
Note : Do Not bend more than 15°.
Fixation with 4.5 & 6.5 mm Screws.
Profile
Thickness - 2.8 mm
Width - 12.0 mm
Hole Spacing - 16.0 mm
Length : 5 Hole to 24 Hole
Cat. No. : MJ 037

Semi - Tubular Plate 4.5 mm
Fixtion with 4.5 mm Cortical screws.
A compression effect can be achieved by eccentric Positioning of the screws remote from the fracture line.
Profile
Thickness - 2.0 mm
Width - 11.0 mm
Hole Spacing - 16.0 and 26.0 mm
Length : 4 Hole to 12 Hole
Cat. No. : MJ 038

LC - DCP 4.5 mm, BOARD
Fixation With 4.5 and 6.5 mm Screw.
The LC- DCP holes allow compression in both direction of the longitudinal axis.
The end holes can be used for cancellous bone screws.
undercuts : For reduced vascular daage.
Indication : As a tension band plate on the femur and for Humeral Pseudarthrosis.
(Not intended for the Tibia)
LC-DCP = Limited Contact Dynamic Compression Plate.
Profile
Thickness- 5.0 mm
Width - 16.0 mm
Hole Spacing - 18.0 mm
Length : 4 Hole to 18 Hole
Cat. No. : MJ 039

LC - DCP 4.5 mm, Narrow
Fixation With 4.5 and 6.5 mm Screw.
The LC- DCP holes allow compression in both direction of the longitudinal axis.
The end holes can be used for cancellous bone screws.
undercuts : For reduced vascular daage.
Indication : As a neutralisation and tension band plate on the tibia.
(Not intended for the Tibia)
LC-DCP = Limited Contact Dynamic Compression Plate.
Profile
Thickness- 4.0 mm
Width - 12.0 mm
Hole Spacing - 18.0 mm
Length : 4 Hole to 16 Hole
Cat. No. : MJ 040

Product List
New Spinal Implants

DCP 4.5 mm, BROAD
Fixation With 4.5 and 6.5 mm Screw.
All holes are designed as self - copressing holes. All the end holes are designed for cancellous bone screws.
Indication : As a tension band plate on the femur and for humeral pseudoarthrosis
(Not intended for the Tibia)
Use board plates with six or seven holes in exceptional cases only, e.g. on the humerus.
Profile
Thickness- 5.0 mm
Width - 16.0 mm
Hole Spacing - 16.0 mm and 25.0 mm
Length : 4 Hole to 20 Hole
Cat. No. : MJ 041

DCP 4.5 mm, Narrow
Fixation With 4.5 and 6.5 mm Screw.
All holes are designed as self - copressing holes. All the end holes are designed for cancellous screws.
Indication : As a neutralisation and tension bandplate on the tibia.
(Not intended for the Femur.)
Profile
Thickness- 4.0 mm
Width - 12.0 mm
Hole Spacing - 16.0 mm and 25.0 mm
Length : 4 Hole to 18 Hole
Cat. No. : MJ 042

T - Buttress Plate 4.5 mm
With double bend, as buttress for tibial head fractures.
Fixation with 4.5 & 6.5 mm Screws.
Profile
Thickness- 2.0 mm
Width - 17.0 mm
Length : 4 Hole to 14 Hole
Cat. No. : MJ 043